jual cat tembok interior dan exterior merk kcc korea korevon

jual cat tembok interior dan exterior merk kcc korea korevon

Product Details

Korevon is a premium, algae and weather 100% acrylic wall finish formulated to provide at least 5 years protection for exterior wall surfaces. Korevon acrylic exterior wall finish is alkali resistant, has excellent adhesion, improved dirt resistant property and pigmented with light stable colorant that provides a smooth and highly decorative finishing. Approved by SIRIM to Malaysia Standard MS 134:1989

Recommend Use: Korevon is specially formulated for exterior plastered wall and masonry. It is suitable for new or previously painted masonry surfaces such as brickwork, plaster, cement, rendering and asbestos.Technical Information  Finish Low sheen finish Color According to standard color card. Also available in KCC ColorBank ATM range. Volume Solids Approx. 35% (nominal), depends on color. Flash Point Non-flammable Specific gravity 1.18 - 1.31(Depends on Colour). Viscosity 85 - 105 K.U. Fungus and algae resistant Excellent. Alkali resistant Good. Water resistant Good. Scrub resistant Good. Shelf life 12 months. Application Details Application Methods Roller, brush or Spray gun. Mixing ratio (by volume) The paint is ready for use after thorough stirring. For sealing new or bare surface thin up to 10% of clean water. Thinner / cleaner Clean water. Dry to touch 15-30 minutes, depending on ambient temperature. Hard dry 30-60 minutes, depending on ambient temperature. Dry to recoat 2 hours. Theoretical spreading rate 10 m2 / liter. Practical spreading rate (depend surface porosity) 8 m2 / liter(20% loss factor). Wet film thickness 100 microns. Dry film thickness 35 microns. Surface PreparationNew and bare surfaceNew plastered surfaces must be allowed to dry thoroughly at least 28 days or less than 12% moisture content as measured with a moisture meter. All surfaces to be painted must be sound, dry, clean and free of oil, grease, dirt, mildew, form release agents, curing compounds and other foreign substrates. Previously painted surface All loose or defective paint or powdery residues shall be removed by brushing and scrapping using a stiff fiber brush or high pressured water jet. Any area affected by mould, algae, lichen, moss and fungus shall be treated with KCC fungicidal solution. Make good any minor surface imperfection with suitable exterior grade putty or sealant. Ensure surface is dry, clean, free from dirt, grease or wax before application of any paint. Porous surface with high absorption should first primed with Koresil 400 or Koresil 401 sealers. Typical Painting System Surface condition Sealer (1 coat) Finishing (2 coats) New and bare surface Koresil 400 or Koresil 401 Korevon Previously painted surface Koresil 400 or Koresil 401 Korevon Storage and Packaging Storage The product must be kept in a cool and well-ventilated place protected from direct sunlight. Container must be kept tightly close. Handling Handle with care. Stir well before use. Pack Size 5 liters & 20 liters. Safety Precaution Avoid contact with skin and eyes. Keep container closed when no in use. Provide good ventilation during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains or water courses,Keep out of Reach of Children. ·         Untuk informasi lebih lanjut dapat menghubungi kami, DIDIK MARJADI SURABAYA Tlp.03172465871 ( FLEXI ), 081252380319 ( SIMPATI ), 081554189664 ( INDOSAT ) , 087855734837 ( XL )