Kamis, 23 Mei 2013

jual cat tembok interior dan exterior merk kcc korea korevon lite

jual cat tembok interior dan exterior merk kcc korea korevon lite

Product Details
Korevon-Lite is a premium interior modified acrylic wall finish with excellent flow and highly durable smooth matt finish. It has good stain resistance and withstand moderately vigorous washing.
Recommend Use: Korevon-Lite is suitable for all normal interior wall including brickwork, cement, wallboard, plaster and ceiling surface but not suitable for uses in areas subject to frequent or heavy condensation as found in bathroom and some kitchen.Technical Information 
FinishMatt
ColorAccording to standard color card. Also available in KCC ColorBank ATM range.
Volume SolidsApprox. 36% (nominal), depends on color.
Flash PointNon-flammable
Specific gravity1.26 - 1.32(Depends on Colour).
Viscosity85 - 105 K.U.
Alkali resistantGood.
Water resistantModerate.
Shelf life12 months.
Application Details
Application MethodsRoller, brush or Spray gun.
Mixing ratio (by volume)The paint is ready for use after thorough stirring. If thinning is required, thin up to 5% of clean water.
Thinner / cleanerClean water.
Dry to touch20-30 minutes, depending on ambient temperature.
Hard dry45-60 minutes, depending on ambient temperature.
Dry to recoat1  - 2 hours.
Theoretical spreading rate10 -11 m2 / liter.
Practical spreading rate (depend surface porosity)8 - 9 m2 / liter(20% loss factor).
Wet film thickness111 microns.
Dry film thickness40 microns.
Surface PreparationNew and bare surfaceNew plastered surfaces must be allowed to dry thoroughly at least 28 days or less than 12% moisture content as measured with a moisture meter. All surfaces to be painted must be sound, dry, clean and free of oil, grease, dirt, mildew, form release agents, curing compounds and other foreign substrates.
Previously painted surface
All loose or defective paint or powdery residues shall be thoroughly rubbed down using a suitable abrasive paper and dusted off. Make good any minor surface imperfection with suitable putty or filler. Ensure surface is dry, clean, dirt free, no grease or wax before application of any paint.
Typical Painting System
Surface conditionSealer (1 coat)Finishing (2 coats)
New and bare surfaceKoresil 400 or Koresil 401Korevon-Lite
Previously painted surfaceKoresil 400 or Koresil 401Korevon-Lite
Storage and Packaging
StorageThe product must be kept in a cool and well-ventilated place protected from direct sunlight. Container must be kept tightly close.
HandlingHandle with care. Stir well before use.
Pack Size5 liters & 20 liters.
Safety Precaution
Avoid contact with skin and eyes. Keep container closed when no in use. Provide good ventilation during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains or water courses,Keep out of Reach of Children.

·         Untuk informasi lebih lanjut dapat menghubungi kami, DIDIK MARJADI SURABAYA Tlp.03172465871 ( FLEXI ), 081252380319 ( SIMPATI ), 081554189664 ( INDOSAT ) , 087855734837 ( XL )

0 komentar:

Posting Komentar