jual cat tembok interior dan exterior merk kcc korea koresil 400

jual cat tembok interior dan exterior merk kcc korea koresil 400

Product Details

Koresil 400 is a fast drying quality water borne acrylic wall sealer for both interior and exterior application. Koresil 400 is alkali resistant, good opacity, has excellent adhesion and able to minimize the risk of efflorescent and seals off the substrate.

Recommend Use: Koresil - 400 is specially formulated for both interior and exterior plastered wall and masonry. It is suitable for new or previously painted masonry surface such as brickwork, plaster, cement, rendering and asbestos.Technical Information  Finish Flat Color White only Volume Solids Approx. 50% (nominal). Flash Point Non-flammable Specific gravity 1.55. Viscosity 80 - 100 K.U. Alkali resistant Very Good. Water resistant Very Good. Water Vapor Permeability Good. Shelf life 12 months. Application Details Application Methods Roller, brush or Spray gun. Mixing ratio (by volume) The paint is ready for use after thorough stirring. If thinning is required, clean water may be added up to a max 5%. Thinner / cleaner Clean water. Dry to touch 15-20 minutes, depending on ambient temperature. Hard dry 30-60 minutes, depending on ambient temperature. Dry to recoat 2 hours. Theoretical spreading rate 10 m2 / liter. Practical spreading rate (depend surface porosity) 8 m2 / liter(20% loss factor). Wet film thickness 80 microns. Dry film thickness 40 microns. Surface PreparationNew and bare surfaceNew plastered surfaces must be allowed to dry thoroughly at least 28 days or less than 12% moisture content as measured with a moisture meter. All surfaces to be painted must be sound, dry, clean and free of oil, grease, dirt, mildew, form release agents, curing compounds and other foreign substrates. Previously painted surface All loose or defective paint or powdery residues shall be thoroughly rubbed down using a suitable abrasive paper and dusted off. Make good any minor surface imperfection with suitable putty or filler. Ensure surface is dry, clean, dirt free, no grease or wax before application of any paint. Porous surface with high absorption should first primed with Koresil 400 or Koresil 401 sealers. Typical Painting System Surface condition Sealer (1 coat) Finishing (2 coats) New and bare surface Koresil 400 or Koresil 401 Korevon / Korevon-Silk / Korevon-Lite / MediSilk 4-IN-1 / Koreton-Matt Previously painted surface Koresil 400 or Koresil 401 Korevon / Korevon-Silk / Korevon-Lite / MediSilk 4-IN-1 / Koreton-Matt Storage and Packaging Storage The product must be kept in a cool and well-ventilated place protected from direct sunlight. Container must be kept tightly close. Handling Handle with care. Stir well before use. Pack Size 5 liters & 20 liters. Safety Precaution Avoid contact with skin and eyes. Keep container closed when no in use. Provide good ventilation during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains or water courses,Keep out of Reach of Children. ·         Untuk informasi lebih lanjut dapat menghubungi kami, DIDIK MARJADI SURABAYA Tlp.03172465871 ( FLEXI ), 081252380319 ( SIMPATI ), 081554189664 ( INDOSAT ) , 087855734837 ( XL )